Gå til dansk side

Salg

Grifter 35.5"

Aussie TeamRider Jordan Riachi loved his Steezestoker, but wanted something a little lighter, shorter and more manouverable. So together, we came up with this - the Grifter, an all-new brick shape.

Lagerstatus: På lager

Pris: 2.099,00 kr

Special Price 1.799,95 kr

Lush Longboards

Beskrivelse

Detaljer

The intention here was to make a short, functional deck based on a 25.5" wheelbase, which is one of the shorter options on Fabian's Steezestoker. Jordan wanted this deck to be focussed on downhill and freeride, which has allowed us to loose a lot of length as we don't really need a full nose and tail at the target wheelbase. We also widened the nose and tail out to maximise the standing platform, giving as much room as possible on a relatively short wheelbase.

What we've ended up with is a highly functional shape, with room to move your feet, but with the manourverability and response that a shorter wheelbase brings. If you are pushing your switch skating you'll appreciate the symmetry, and we've used a real subtle Rocker Profile to give your feet enough grip for those giant standups.

Like the Steezestoker, we have added many different wheelbase options, so whlie the deck is shaped around a 25.5," it is actually possible to go longer to 26.3" for a little more stability, or right down to 20.5" for an ultra-short brick with full nose and tail. CNC Wheel Wells minimise wheelbite however you choose to set things up.

This deck oozes design and function... if you want to skate like Jordan, you should check this deck out.

Details:

Length: 35.5" / 90.2cm
Width: 9.75" / 24.8cm
Wheelbase: Multiple 20.5" / 52cm - 26.3" / 66.6cm
Tail: 2.17" / 5.5cm - 5" / 12.7cm
Construction: Cold Pressed 9ply Canadian Maple w/ Epoxy Glue
Profile: 0.7" / 1.8cm Symmetrical Rocker
Flex: Bone Stiff

Denotes 9 plies of Canadian Maple – stiffer than most.

We use 100% Canadian Maple for all of our decks, some higher-end decks feature more advanced materials too. Maple is shipped as a raw log and cut into veneers at the woodshop to ensure consistent humidity.

We use Latex and Epoxy glues, depending on the construction needs.

All our decks are individually pressed in Hydraulic presses. We don’t hot press (which is faster to produce but more prone to warping), and we don’t stack multiple boards in a press (which leads to inconsistent concaves and profiles throughout a run of boards).

Epoxy glues are used in decks with X-Flex and 4X Composite constructions. Each veneer is soaked through with a waterproof epoxy, allowing use of composite layers in with the maple. The Epoxy also adds strength to the natural fibres in the wood grain, essentially turning the whole deck into a multi-layer composite layup. We do sometimes used Epoxy without the glass layers too, to take advantage of the better flex and impact resistance properties this glue gives us.Boards are cut and finished with a mixture of CNC routers and good old hand sanding.

We use heat transfers to keep the graphic fresh and multiple layers of laquer to keep the weather out.

Lush Longboards… Cutting wood since ’99

Yderligere information

Yderligere information

Brand Lush Longboards

Bedømmelser

Indsend din bedømmelse

  1 stjerne 2 stjerner 3 stjerner 4 stjerner 5 stjerner
Bedømmelse